Filter
Top Products
38
EN
Shooting functions k Various shooting functions
3
When the shutter speed is set to 2 sec.
Slow synchronization (1st curtain)/Red-eye reduction flash !SLOW
While using slow synchronization with flash shooting, you can also use this function to
achieve red-eye reduction. When shooting a subject against a night scene, this function
allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to
shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction.
Hence, only 1st curtain synchronization setting is available.
Fill-in flash #
The flash fires regardless of the light conditions.
This mode is useful for eliminating shadows on
the subject’s face (such as shadows from tree
leaves), in a backlight situation, or for correcting
the color shift produced by artificial lighting
(especially fluorescent light).
Flash off $
The flash does not fire.
Even in this mode, the flash can be used as an AF illuminator when it is raised. g “AF
illuminator” (P. 49)
Manual flash
This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set
the f value on the lens based on the distance to the subject.
x Notes
•
When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject against
a bright background with the fill-in flash, the background may be overexposed. In this case, use the
optional FL-50 or FL-36 external flash and shoot in the Super FP flash mode.
g
“Super FP
flash” (P. 42)
Ratio of amount of light GN: Guide number
(Equivalent to ISO 100)
FULL (1/1) 12
1/4 6
1/16 3
1/64 1.5
0
2
seconds
2nd curtain
1st curtain
2nd curtain flash fires
1st curtain flash fires
Shutter closes
Shutter fully opens
2 seconds
Calculate the f value on the lens using the following formula.
Aperture (f value) =
GN × ISO sensitivity
Distance to the subject (m)
s0013_e_00_unified.book Page 38 Monday, March 5, 2007 10:04 AM