Filter
Top Products
EN
85
Using the OLYMPUS Master software
7
Connect the camera to your computer with the provided USB cable.
1 Use the provided USB cable to connect the computer’s USB port to the
camera’s multi-connector.
• The location of the USB port varies with the computer. For details, refer to your computer’s
manual.
2 Set the camera’s power switch to ON.
• The selection screen for the USB connection is
displayed.
3 Press ac to select [STORAGE]. Press the
i button.
4 The computer recognizes the camera as a
new device.
• Windows
When you connect the camera to the computer for the first time, the computer automatically
recognizes the camera. Click “OK” when the message saying that the installation is
completed appears.
The computer recognizes the camera as a “Removable Disk ”.
•Macintosh
iPhoto is the default image management application for Mac OS. When you connect your
Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and
start OLYMPUS Master.
Connecting the camera to a computer
x Notes
• When the camera is connected to the computer, none of the camera buttons are functional.
Look for this mark.
USB port
Terminal
Multi-connector
Smaller terminal
USB cable
STORAGE
CONTROL
EASY PRINT
s0013_e_00_unified.book Page 85 Monday, March 5, 2007 10:04 AM