Filter
Top Products
EN
67
Playback functions
4
Copying selected frames
1 Display the images you want to copy and
press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
2 Press p to display the next images you
want to copy and press the i button.
3 After you have selected the images to copy,
press the COPY/< (copy) button.
4 Use ac to select [YES], then press i.
• It is possible to copy selected frames during index
display.
Single-frame copy
1 Select the desired frame and press the COPY/< (copy) button.
2 Use ac to select [YES], then press i.
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the
0 (protect) button.
• 9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the 0
button.
Protecting selected frames
This function lets you protect selected images at one time during single-frame playback or
index display.
1 Display the images you want to protect and press the i button.
• The selected images will be shown with red frames.
• To cancel your selection, press the i button again.
• During index display, press p to select the images you want to protect and press the i
button.
Protecting images k Preventing accidental erasure
COPY/< button
0 button
i button
s0013_e_00_unified.book Page 67 Monday, March 5, 2007 10:04 AM