Filter
Top Products
70
EN
Customizing the settings/functions of your camera
5
5
Customizing the settings/functions of your camera
Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. However, this camera features [RESET] that restores the factory
default settings and [RESET 1] and [RESET 2] that restores settings registered in advance.
The camera settings at that time are registered in [RESET 1] and [RESET 2].
MENU[W][CUSTOM RESET SETTING]
[RESET]/[RESET1]/[RESET2]
• If settings have already been registered, [SET] is displayed next to the [RESET1]/[RESET2]
option.
Registering reset settings
1 Select either [RESET1]/[RESET2] to register
and press the d button.
2 Select [SET] and press the i button.
• To cancel the registration, select [RESET].
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default
settings.
[RESET]: Resets to the factory default settings.
[RESET1]/[RESET2]:
Resets to the registered settings.
1 Select either [RESET]/[RESET1]/[RESET2]
and press the i button.
2 Use ac to select [YES], then press i.
Custom reset setting
s0013_e_00_unified.book Page 70 Monday, March 5, 2007 10:04 AM