Olympus E-410 Digital Camera User Manual


 
EN
91
Getting to know your camera better
8
Other things instead of the subject are focused on the respective AF frames
•Set P (AF frame selection) to R and focus on the center of the image.
g “AF frame selection” (P. 47)
The subject is moving quickly
Focus the camera on a point roughly the same distance away as the subject you want to shoot
(by pressing the shutter button halfway), and then recompose your picture and wait for the
subject to enter the frame.
Close up on the subject using macro lens
When using macro lens to close up on the subject, it is difficult to focus with AF when the
enlargement ratio of the subject is bigger. Set to manual focus (MF), rotate the focus ring and
focus manually. g “MF (manual focus)” (P. 48)
Taking pictures in low light conditions
The built-in flash can be set to function as an AF illuminator. The flash helps to focus in low-light
conditions in the AF mode when raised. g “Using the built-in flash” (P. 40)
Subjects that are difficult to focus on
It may be difficult to focus with auto focus in the following situations.
In any situation, focus on something with high contrast that is at the same distance as the
subject, determine the composition and shoot the picture.
Taking pictures without blurring
There are several factors that can cause the picture to blur.
The subject is too dark
Change the shutter speed to match the brightness of the subject. If the shutter speed is set low
to shoot a dark subject, blurring is likely to occur if the subject moves. In addition, when the
flash is turned off in g (Scene mode), the shutter speed becomes slower.
Mount the camera on a tripod. Using the remote control (optional) to close the shutter is also
effective for reducing blurring.
There are also ways to shoot with [q] (DIS MODE) under g (Scene mode). As the ISO
sensitivity increases automatically, you can hand hold the camera and take pictures in low light
situations with the flash off.
The camera or your hand moves when pressing the shutter button.
Press the shutter button gently or hold the camera securely with both hands.
Taking pictures with less flash
The flash will light up automatically when it is not bright enough. If the subject is too far away,
the flash may have no effect. Here is how to take pictures without the flash in this type of
situation.
AF confirmation mark is
blinking
These subjects are not
focused.
Subject with low contrast Excessively bright light
in center of frame
Subject with
repeated patterns
AF confirmation mark
lights up but the subject
is not focused.
Subjects at different
distances
Fast-moving subject Subject not inside
AF frame
s0013_e_00_unified.book Page 91 Monday, March 5, 2007 10:04 AM