100
With a computer
6 Click the [Start copying] button.
≥A confirmation message appears. Click
[Yes] and copying starts.
ª Writing back to an SD card
≥Insert an SD card in this unit and format the
card. (l 78)
(Use an SD card that can be used for motion
picture recording. (l 27))
Please be aware that if an SD card is
formatted, then all the data recorded on the
card will be erased. Store important data on a
computer etc.
≥Insert the battery and connect the AC
adaptor, then rotate the mode dial to select
.
≥Connect this unit to the computer and start
HD Writer Ver2.5.
1 Click the [Write data to media]
button.
2 Click on the top right and
select the folder with the image
data you want to copy to the SD
card.
3 Select [Start writing] to copy the
images from the hard disk of the
computer to the SD card.
≥A confirmation message appears. Click
[Yes] and copying starts.
≥Refer to the operating instructions of the
software (PDF file) for details on how to use it.
≥Do not insert a disc created with HD Writer
Ver2.5 in a device that does not support the
AVCHD format. It may no longer be possible to
eject it. Also, the disc cannot be played back on
devices that do not support the AVCHD format.
≥Some discs created with HD Writer Ver2.5
cannot be played on other devices, even if they
support the AVCHD. In such cases, rewrite the
motion pictures to the SD card and play them
back on this unit instead.
≥The menu screen created with HD Writer
Ver2.5 does not appear on this unit. Use a
device that supports the AVCHD for playback.
PC
080529_1
080529_1
VQT1Q93_ENG_PP.book 100 ページ 2008年3月6日 木曜日 午後5時42分