Filter
Top Products
Others
107
Messages
CANNOT RECORD. Data writing to the SD card has failed.
NO DATA. There are no motion pictures or still pictures recorded on the SD
card.
If this message appears although data is recorded on the SD card,
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
CANNOT BE USED DUE
TO INCOMPATIBLE DATA.
The recording format is different so it cannot be used. Save the data
on the SD card to a computer, then use the SD card after formatting
it.
CANNOT RECORD -
INCOMPATIBLE CONTROL
DATA.
CHECK CARD. This card is not compatible or it cannot be recognized by the unit.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
CARD LOCKED. The write protection switch on the SD Card is set to LOCK. (l 28)
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
The data is being processed. Close the card slot cover and wait for
a while.
CARD FULL. The SD card is full so no further data can be recorded. Delete
unnecessary scenes/files or insert a new SD card. (l 34, 73, 75)
CANNOT RECORD.
THE NUMBER OF SCENES
HAS EXCEEDED THE
MAXIMUM LIMIT.
The maximum number of recordable scenes on 1 SD card has been
reached so recording is not possible. Delete unnecessary scenes or
insert a new SD card. (l 34, 73, 75)
CANNOT RECORD - DATE
CAPACITY IS FULL.
The number of scenes grouped together on a date has reached the
maximum number so recording is not possible. Delete unnecessary
scenes or insert a new SD card. (l 34, 73, 75)
CANNOT OPERATE.
TEMPERATURE IS HIGH.
PLEASE TURN OFF AND
WAIT A WHILE.
The internal temperature of this unit is high so it cannot be operated.
Turn off the power, wait until the temperature falls and then turn on
the power again.
THIS BATTERY CANNOT
BE USED.
Use a battery that is compatible with this unit. (l 31)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 32)
If using a Panasonic battery compatible with this unit (l 31),
remove the battery and then insert it again. If the message appears
even after repeating this several times, this unit needs repair.
Detach the power and consult the dealer who you purchased this
unit from. Do not attempt to repair it by yourself.
VQT1Q93_ENG_PP.book 107 ページ ２００８年３月６日 木曜日 午後５時４２分