Panasonic AG-HMC70P Camera Accessories User Manual


 
65
Recording
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN # (0dB to
18dB)
Value closer to [CLOSE] darken the image.
Value closer to [18dB] brighten the image.
When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
To restore to automatic adjustment
Set the AUTO/MANUAL/FOCUS switch to
AUTO.
When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
Manual shutter speed adjustment
Avoid recording under fluorescent light,
mercury light or sodium light because the color
and brightness of the playback image may
change.
If you increase the shutter speed manually, the
gain value will increase automatically
depending on how much the sensitivity lowers
and the noise on the screen may increase.
When recording still pictures, we recommend
setting the shutter speed to 1/500 or less for
even more beautiful pictures.
You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
During normal playback, image movement may
not look smooth.
When recording in an extremely bright place,
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
Manual iris/gain adjustment
If the gain value is increased, the noise on the
screen increases.
Depending on the zoom magnification, there
are iris values that are not displayed.
VQT1Q93_ENG_PP.book 65 ページ 2008年3月6日 木曜日 午後5時42分