Filter
Top Products
Others
113
Problem Check points
Auto focus function does
not work.
≥Is manual focus mode selected?
# Set the AUTO/MANUAL/FOCUS switch to AUTO, or press the
PUSH AUTO button.
≥Are you trying to record a scene which is hard to bring into focus in
auto focus mode?
# There are some recording subjects and surroundings for which
the auto focus does not operate correctly. (l 118) If so, use the
manual focus mode to adjust the focus. (l 62)
Recorded still pictures
are not clear.
≥Are you trying to record small or finely detailed objects with
[PICT. QUALITY] set at [ ]?
# If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [ ], the images may break up into a
mosaic-like pattern. Record with [PICT. QUALITY] set at [ ]
instead. (l 51)
Sound is not played back
from the built-in speaker
of this unit.
≥Is the volume too low?
# The sound volume can be adjusted by moving the MONITOR
LEVEL knob during playback. (l 68)
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
≥Does the input switch on the TV match the connected terminal?
# Please read the operating instructions of your TV and select the
channel that matches the input used for the connection.
≥Is the [TV ASPECT] setting correct?
# Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] # [TV ASPECT]
# [16:9] or [4:3] and press the center of the cursor button.
VQT1Q93_ENG_PP.book 113 ページ ２００８年３月６日 木曜日 午後５時４２分