Filter
Top Products
43
Setup
Pull the finder to pull out the
visibility adjustment lever A inside,
and then move the lever to make the
adjustments.
≥You can focus the video in the viewfinder by
moving the visibility adjustment lever.
If the inside of the viewfinder is stained with dust,
then remove the eye cup holder and remove the
dust with an air blower, etc.
ª Eye cup holder removal method
1Pull the viewfinder to pull out the eye cup
holder A. Then, removed the screw B at the
center.
2Insert a thin tool such as screwdriver in the
hole on the bottom of the eye cup holder.
While pushing the internal tab A, remove the
eye cup holder.
ª Eye cup holder fitting method
1
Check that the EVF LCD unit
A
is pulled out as
far as it goes.
≥If you push in the EVF LCD unit, then you
may not be able to fit it.
2Insert the eye cup holder straight into its
original position until it clicks.
3Screw it in.
To adjust the viewing conditions
of images in the finder
2008.10.10
2008.10.10
Viewfinder maintenance
VQT1Q93_ENG_PP.book 43 ページ ２００８年３月６日 木曜日 午後５時４２分