Filter
Top Products
Others
115
ª With a computer
Problem Check points
“PUSH THE RESET
SWITCH.” is displayed.
≥The unit detects an abnormal condition. Press the RESET button.
The unit restarts.
≥If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
≥Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the power
connected, and consult the dealer who you purchased this unit
from. Do not attempt to repair the unit by yourself.
Part of the AUDIO LEVEL
meter flashes.
≥Part of the AUDIO LEVEL meter may flash when the power is
turned on or when the menu screen is closed. This is not a
malfunction.
A white stripe appears on
the right of the screen.
≥When the center of the cursor key is pressed to display control
icons, a white stripe appears on the right of the screen. This is not a
malfunction.
Problem Check points
Even if connected by the
USB cable, this unit is not
recognized by the
computer.
≥Have you set this unit to the correct mode?
# This unit is not recognized in recording/playback mode. Set it to
PC connection mode.
≥Select another USB terminal on the computer.
≥Check the operating environment. (l 91)
≥Turn the power to the unit off and then back on again and reconnect
the USB cable.
When the USB cable is
disconnected, an error
message will appear on
the computer.
≥To disconnect the USB cable safely, double-click the
icon in the
task tray and follow the instructions on the screen.
Cannot see the PDF
operating instructions for
HD Writer Ver2.5.
≥Is Adobe Acrobat Reader 5.0 or later installed in the computer you
are using?
# To read the operating instructions (a PDF file) for the HD Writer
Ver. 2.5, Adobe Acrobat Reader 5.0, Adobe Reader 7.0 or later
must be installed.
VQT1Q93_ENG_PP.book 115 ページ ２００８年３月６日 木曜日 午後５時４２分