With other products
80
1 Connect this unit and a TV with the HDMI cable (optional).
Use a HDMI cable (optional) A with the logo shown above.
2 Set the mode dial to to turn on the power.
3 Select the input channel on the TV.
Example: Select the [HDMI] channel etc.
(The name of the channel may differ depending on the connected TV.)
4 Start playback on this unit.
The image and audio are output on the TV.
ª If the image or audio from this unit is not output on the TV
≥Check that the plugs are inserted as far as they go.
≥Check the connected terminal.
≥Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
≥Check [HDMI RESOLUTION]. (l 81)
ª Fitting of the ferrite core
When an HDMI cable is connected to this camera, fit
the supplied ferrite core to the cable as close to the
camera as possible.
≥Unhook the two tabs on the ferrite core to open it.
Insert the HDMI cable into the ferrite core and close
it.
A Ferrite core (supplied)
B Tab
C HDMI cable (optional)
1 Connecting with a HDMI cable (optional)
What is HDMI?
HDMI is the next-generation interface for digital devices. When this unit is connected to a HDMI
compatible device, the image and audio can be output with a digital signal. If you connect this unit
and a HDMI compatible high definition TV and then play back the recorded high definition images
(l 14), you can enjoy them in high resolution with high quality sound.
HDMI IN
VQT1Q93_ENG_PP.book 80 ページ ２００８年３月６日 木曜日 午後５時４２分
