Filter
Top Products
77
Editing
You can write the data of the still pictures to be
printed and the number of prints (DPOF data)
onto the SD card.
¬ Rotate the mode dial to select
and then select the (still picture
playback) tab.
1 Press the MENU button, then
select [PLAY SETUP]
#
[DPOF SET] # [SET] and press
the center of the cursor button.
2 Select the file to be set and then
press the center of the cursor
button.
The number of prints set to be in DPOF is
displayed.
3 Move the cursor button up or
down to select the number of
prints, then press the center of
the cursor button.
≥You can select from 0 to 999. (The selected
number of pictures can be printed with the
printer supporting DPOF.)
≥To cancel the setting, set the number of
prints to [0].
≥You can also select multiple files in
succession.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select
[PLAY SETUP] # [DPOF SET] #
[CANCEL ALL] and press the center of the
cursor button.
≥When the confirmation message appears,
select [YES], then press the center of the
cursor button.
ª What is DPOF?
DPOF stands for Digital Print Order Format. This
enables picture printing information to be written
onto an SD card so that it can be used on a
system supporting DPOF.
≥The DPOF setting can be established for up to
999 prints.
≥DPOF setting made on other devices may not
be recognized by this unit. Please perform the
DPOF settings on this unit.
≥You cannot add the recording date to pictures
to be printed with the DPOF settings.
DPOF setting
This is for writing the printing data on
an SD card.
VQT1Q93_ENG_PP.book 77 ページ ２００８年３月６日 木曜日 午後５時４２分