Panasonic AG-HMC70P Camera Accessories User Manual


 
Recording
58
The camera will record two-channel audio. Select from the built-in microphone, an external
microphone, or any microphones or audio devices connected to the XLR CH1/CH2 terminal to record
audio on the respective channels. (Refer to the following table.)
* With this setting, whether the external microphone is connected or not may not affect the
recording channel.
ª Set the AUDIO IN CH1 switch to the FRONT position
When an external microphone is not connected to the external microphone input connector, the built-in
microphone records audio for the built-in microphone left channel (L-ch). When the external
microphone is connected to the external microphone input connector, the external microphone records
audio for the external microphone left channel (L-ch).
ª Set the AUDIO IN CH2 switch to the FRONT position
When the external microphone is not connected to the external microphone input connector, the built-in
microphone records audio for the built-in microphone right channel (R-ch). When the external
microphone is connected to the external microphone input connector, the external microphone records
audio for the external microphone right channel (R-ch).
Input Audio Selection
Setting/State Recording channel
AUDIO IN
CH1switch
AUDIO IN
CH2switch
External
microphone
CH1 CH2
FRONT FRONT Not connected Built-in
microphone L-ch
Built-in
microphone R-ch
FRONT FRONT Connected External
microphone L-ch
External
microphone R-ch
REAR REAR
*
XLR CH1 XLR CH2
FRONT REAR Not connected Built-in
microphone L-ch
XLR CH2
FRONT REAR Connected External
microphone L-ch
XLR CH2
REAR FRONT Not connected XLR CH1 Built-in
microphone R-ch
REAR FRONT Connected XLR CH1 External
microphone R-ch
Use the Built-in microphone/External microphone
VQT1Q93_ENG_PP.book 58 ページ 2008年3月6日 木曜日 午後5時42分