104
Others
≥Underlined items are the initial shipping
condition.
ª [REC LAMP]
The recording lamp lights during recording and
flashes when the unit receives a signal from the
remote control or when the self-timer is counting
down. When this is set to [OFF], it does not light
during recording.
ª [DISPLAY]
The screen indications are selected as shown in
the illustration below.
≥The display will change according to the
presence or absence of an inserted SD card.
ª [POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without any
operation, this unit automatically turns off to
prevent the battery from running down. When
you use this unit, turn it on again.
≥In the following cases, the unit may not turn off
even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or
printer via the USB cable
ª [BEEP SOUND]
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps/4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(l 107)
ª [INITIAL SET]
When there is a menu that cannot be selected
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
Menus related to [ADVANCED]
and [SETUP]
≥[OFF] ≥[ON]
≥[OFF] ≥[ON]
[OFF]
[ON]
≥[OFF] ≥[5 MINUTES]
R30min
30min
0h00m00s
AUTO
HN
≥[OFF] ≥[ON]
≥[YES] ≥[NO]
VQT1Q93_ENG_PP.book 104 ページ ２００８年３月６日 木曜日 午後５時４２分
