Panasonic DMC FZ 28 Digital Camera User Manual


 
VQT1S36
116
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
Selecting a single picture and printing it and in step
3 of the
Selecting multiple pictures and printing them procedures.
When you want to print pictures in a paper size or a layout which is not
supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT] to [{]
and then set the paper size or the layout on the printer. (For details,
refer to the operating instructions of the printer.)
When [DPOF PICTURE] has been selected, the [PRINT WITH DATE]
and [NUM. OF PRINTS] items are not displayed.
If the printer does not support date printing, the date cannot be printed on the picture.
Since the printer’s settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
Note
When asking the photo shop to print the pictures
By stamping the date using [TEXT STAMP] (P101) or setting date printing at the time of the
[DPOF PRINT] (P108) setting before going to a photo shop, the dates can be printed at the
photo shop.
You can set the number of prints up to 999.
Press 3 to select [PRINT START] and then press
[MENU/SET].
Refer to P116 for the items which can be set before starting to
print the pictures.
Press [MENU/SET] to cancel printing.
Disconnect the USB connection cable after printing.
Print Settings
[PRINT WITH DATE]
Item Description of settings
[OFF] Date is not printed.
[ON] Date is printed.
[NUM. OF PRINTS]
[PAPER SIZE]
Item Description of settings
{ Settings on the printer are prioritized.
[L/3.5qk5q]
89 mm
k
127 mm
[2L/5qk7q] 127 mmk178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
DMC-FZ28P_PC.book 116 ページ 2008年7月2日 水曜日 午後11時14分