Filter
Top Products
57
VQT1S36
Advanced (Recording pictures)
Tilt the joystick towards 3/4 to set the
aperture value.
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [ ].
Tilt the joystick towards 3/4 to set the
shutter speed.
Take a picture.
Note
•
Refer to P58 for the available aperture values and the shutter speed.
• The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the
pictures using the review function or playback mode.
• Set the aperture value to a higher number when the subject is too bright. Set the aperture value
to a lower number when the subject is too dim.
• The aperture value and the shutter speed displayed on the screen turn red when the exposure
is not adequate.
• We recommend using a tripod when the shutter speed is slow.
• [ ] cannot be set for shutter-priority AE
[REC] mode: ²
Taking picture by setting the exposure manually
Determine the exposure by manually setting the aperture value and the shutter speed.
Set the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [²].
Tilt the joystick towards 3/4/2/1 to set
the aperture value and the shutter speed.
• Focus can be set manually when [ ] is displaying.
(P59)
[ ] Shutter-priority AE
DMC-FZ28P_PC.book 57 ページ ２００８年７月２日 水曜日 午後１１時１４分