VQT1S36
74
Advanced (Recording pictures)
[REC] mode: n
Advanced (Recording pictures)
Motion Picture Mode
• When you set the picture quality to [ ], [ ], or [ ], we recommend using a high-speed
card with “10MB/s” or greater displayed on the package.
Press [MENU/SET].
Press 3/4 to select [PICTURE MODE] and then
press 1.
Press 3/4 to select the item and then press
[MENU/SET].
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [n].
Press the shutter button halfway to focus
and then press it fully to start recording.
A Audio recording
• The available recording time B is displayed on the top
right and the elapsed recording time C is displayed on
the bottom right of the screen.
• After pressing the shutter button fully, release it straight
away. If the button is held down, the sound will not be
recorded for a few seconds when recording starts.
• When the subject is focused, the focus indication
lights.
• You cannot change the zoom speed. (P39)
• The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full in the middle of recording, the camera
stops recording automatically.
Changing the settings for the aspect ratio and the picture quality
DMC-FZ28P_PC.book 74 ページ 2008年7月2日 水曜日 午後11時14分