Filter
Top Products
81
VQT1S36
Advanced (Recording pictures)
Note
•
The ends of the recorded pictures may be cut at printing so check before printing. (P139)
For details on [REC] mode menu settings, refer to P22.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
³±
[OFF]/[ON]
Note
•
Refer to P49 for the flash range.
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• The maximum ISO sensitivity will be set to the value set in [ISO LIMIT SET] when set to [ON].
When the [ISO LIMIT SET] is set to [AUTO], it will be set automatically within the range up to
[ISO800] depending on the brightness.
For details on [REC] mode menu settings, refer to P22.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
³±´²
[AUTO]/[100]/[200]/[400]/[800]/[1600]
Note
•
When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of value set
with [ISO LIMIT SET].
• ISO sensitivity will adjust automatically depending on brightness within the maximum setting of
[ISO400] ([ISO800] when the flash is used) when [AUTO] is selected for [ISO LIMIT SET].
• The setting is not available when [INTELLIGENT ISO] is being used. ([ ] is displayed.)
[X][Y][W]
[INTELLIGENT ISO]
> [SENSITIVITY]
ISO sensitivity
100 1600
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
DMC-FZ28P_PC.book 81 ページ ２００８年７月２日 水曜日 午後１１時１４分