Filter
Top Products
87
VQT1S36
Advanced (Recording pictures)
When selecting [ ]
1 Press 3/4/2/1 to select AF
area as shown in the figure to the
right.
2 Press [MENU/SET] to set.
Note
•
The spot metering target can also be moved to match the AF area when using [Ù].
• Position of the AF area will return to initial state when the camera is set to Intelligent auto
mode, When the power save mode is activated, or When this unit is turned off.
For details on [REC] mode menu settings, refer to P22.
The camera will adjust focus automatically depending on the settings.
Applicable modes:
¢ In motion picture mode, only [ ] (Continuous AF) can be selected.
About [] and []
[ ] will adjust the focus automatically when the jitter of the camera gets small. [ ] will
adjust the focus at all times (continuous AF operation).
The camera will adjust the focus automatically, and the focus adjustment when the shutter
button is pressed becomes faster. It is effective when you do not want to miss the photo
opportunity.
Note
•
The battery will be consumed faster than usual.
• Press the shutter button halfway again when it is difficult to focus on the subject.
• When [PRE AF] is set to , it may take time to focus on the subject if you rotate the zoom
lever from Wide to Tele or suddenly change the subject from a distant one to a nearby one.
[PRE AF]
[OFF]:
[ ]: Quick AF [ ] is displayed on the screen.
[ ]: Continuous AF
¢
[ ] is displayed on the screen.
DMC-FZ28P_PC.book 87 ページ ２００８年７月２日 水曜日 午後１１時１４分