Panasonic DMC-LX2 Digital Camera User Manual


 
Preparation
13
VQT0Y44
Charging the Battery with the Charger
The battery is not charged when the
camera is shipped. Charge the battery
before use.
1
Attach the battery with attention
to the direction of the battery.
2
Connect the charger to the
electrical outlet.
• When the [CHARGE] indicator A lights
in green, charging starts.
• When the [CHARGE] indicator
A turns
off (in about 130 minutes), charging is
completed.
• Refer to P14 when the [CHARGE]
indicator blinks.
B: Open until it clicks.
3
Detach the battery after charging
is complete.
• After charging is completed, be sure to
disconnect the charger from the electrical
outlet.
• The battery becomes warm after use/
charge or during charge. The camera also
becomes warm during use. However, this
is not a malfunction with the camera.
• The battery will discharge if left for a long
time after charging. Recharge it.
• You can recharge the consumed portion
before exhausting the remaining charge.
• Use the dedicated charger and battery.
• Charge the battery with the charger
indoors.
• Do not disassemble or modify the
charger.
A