Filter
Top Products
Advanced
42
VQT0Y44
3
Press [MENU/SET].
• The [POWER LCD] or [HIGH ANGLE]
icon appears.
B: POWER LCD
C: HIGH ANGLE
• You can also use the joystick to perform
steps 2 and 3.
n Canceling High angle mode or Power
LCD mode
• If you press and hold [DISPLAY/LCD
MODE] again for 1 second the screen
shown in step 2 is displayed. Select [OFF]
to cancel Power LCD mode or High angle
mode.
• High angle mode is also canceled if you
turn the camera off or power save mode is
activated.
• The brightness of the pictures displayed
on the LCD monitor is adjusted when
Power LCD mode or High angle mode is
activated. Therefore, some subjects may
look different on the LCD monitor.
However, this does not affect the recorded
pictures.
• The LCD monitor automatically returns to
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
• You may not notice the High angle mode
effect if the LCD monitor is difficult to see
because of light from the sun etc. shining
on it. In this case, we recommend using
your hand or another object to block the
light when using the camera.
• High angle mode is not activated in the
following cases.
–In playback mode
–While the menu screen is displayed
–While the review screen is displayed
[]:
POWER LCD
The LCD monitor
becomes brighter and
easier to see even when
taking pictures outdoors.
[]:
HIGH ANGLE
The LCD monitor is easier
to see when taking
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because there
is a person in the way.
(However it becomes
more difficult to see when
looked at straight on.)
[OFF]
The LCD monitor returns
to the normal brightness.
1
19
C:
B:
To select To set