Filter
Top Products
108
Chapter 8 Menu Description Tables (continued)
8-4-2 VF MARKER
8-4-3 USER BOX
8-4-4 VF INDICATOR1
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
TA BLE A
B
Select the VF MARKER setting table.
First, select table A or B, then set the
items below for each table.
–CUFE
CENTER MARK OFF
1
2
3
4
Switch the center mark.
OFF:Do not display center mark.
1: + (large)
2: Hollow (large)
3: + (small)
4: Hollow (small)
–CUFE
SAFETY ZONE OFF
1
2
Select the frame type for the safety
zone.
OFF:Do not display frame.
1: Box
2: Corner frame
–CUFE
SAFETY AREA 80%
:
90%
:
100%
Set the position of the safety zone.
–CUFE
FRAME SIG 4:3
13:9
14:9
VISTA
Set the frame marker.
Only enabled when REC MODE is set
to 16:9.
The VISTA ratio is 16:8.65.
–CUFE
FRAME MARK ON
OFF
Set the frame marker to ON or OFF.
–CUFE
FRAME LVL 0
:
15
Set the level outside the frame marker.
0: Equivalent to signal OFF.
15: Same brightness as center area.
This setting, however, is disabled if
the FRAME SIG is set to VISTA.
–CUFE
Items/
Data Saved
Adjustable
Range
Remarks
USER BOX ON
OFF
Select whether or not to display the
USER BOX.
–CUFE
USER BOX
WIDTH
1
:
13
:
100
Set the width of the USER BOX.
–CUFE
USER BOX
HEIGHT
1
:
13
:
121
Set the height of the USER BOX.
–CUFE
USER BOX H
POS
–50
:
+00
:
+50
Set the horizontal position of the USER
BOX.
–CUFE
USER BOX V
POS
–121
:
+000
:
+121
Set the vertical position of the USER
BOX.
–CUFE
Items/
Data Saved
Adjustable
Range
Remarks
EXTENDER ON
OFF
Set the extender indication to ON or
OFF.
–CUFE
SHUTTER ON
OFF
Set the shutter speed indication to ON
or OFF.
–CUFE
FILTER ON
OFF
Set the filter No. indication to ON or
OFF.
–CUFE
WHITE ON
OFF
Set the AWB PRE/A/B indication to ON
or OFF.
–CUFE
GAIN ON
OFF
Set to ON or OFF the indications for
current gain setting, S.GAIN.
–CUFE
IRIS OFF
IRIS
S+IRIS
S
OFF: Disable indications of both the
super iris ON status and the iris
value.
IRIS: Enable only the iris value
indication.
S+IRIS
: Enables indications of the super
iris ON status and the iris value.
S: Enable indication of the super
iris ON status.
(The iris value indication and the iris
override indication/non indication are
interlocked.)
–CUFE
CAMERA ID OFF
BAR
CAM
ALWAYS
Select when to enable the ID mix during
recording.
OFF: Disable ID mix.
BAR: Enable when recording color
bars.
CAM: Enable when recording
camera image.
ALWAYS
: Enable always.
<Note>
ID MIX INH of the “8-9-1 OPTION” is
set to OFF to mix an ID to the camera
image.
ID is not superimposed in the EE mode,
but recorded onto the P2 card.
–CUFE
ID POSITION UPPER R
UPPER L
LOWER R
LOWER L
Set the camera ID recording position.
UPPER R
: Upper right.
UPPER L
: Upper left.
LOWER R
: Lower right.
LOWER L
: Lower left.
–CUFE
DATE/TIME ON
OFF
Select whether or not to simultaneously
mix the year/month/date and hour/
minute/second when recording the
camera ID.
–CUFE
ZOOM LVL ON
OFF
Set the zoom position indication to ON
or OFF.
–CUFE
COLOR TEMP ON
OFF
Set the color temperature indication to
ON or OFF.
–CUFE
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ