Panasonic AJ-SPC700 P Camcorder User Manual


 
8
Chapter 1 Introduction (continued)
/4-channel Digital Audio Recording (all formats)
All formats - DVCPRO, DV and DVCPRO50 - support 4-
channel digital audio recording with high-quality sound
(48 kHz/16 bits).
However, this camera uses two audio channels,
recording the same audio signals onto Audio Channels
3 and 1, and Audio Channels 4 and 2.
/Clip Thumbnailing
z Automatic generation of thumbnails
The AJ-SPC700P automatically generates a
thumbnail for each recording cut (clip). It is possible to
make use of this on the camera-recorder as well as for
non-linear editing purposes, and after uploading to a
server.
z Thumbnail display on the LCD monitor
The 3.5-inch color LCD side of the your video camera
recorder can provide a multi-screen view of 12 clip
thumbnails. You can choose a desired clip to playback
instantly.
z Seamless playback of selected clips
You can select more than one clip from the thumbnail
view for continuous playback and output of seamless
video.
<Note>
During continuous playback of clips in different
recording formats, seamless playback is not available.
z Display of clip information
By selecting clips, information added to clips, such as
the recording time, Voice Memo, Shot Marks and
metadata can be checked.
/Voice Memos & Shot Marks
Each clip can incorporate comments, in the form of
voice memos, associated with the time code, together
with shot marks which, for example, can help you
distinguish OK cuts from reject cuts.
Both voice memos and shot marks can be added to
selected clips during and after a recording. This is
helpful for editing recorded video.
/Front-mounted Sound Level Control Mechanism
The AJ-SPC700P features a front-mounted control for
fine adjustment of the sound recording level. This
control is particularly effective for adjusting the sound
level when you are shooting without a sound recordist.
The control can be disabled.
/Support for Built-in Unislot Wireless Receive
The AJ-SPC700P is designed to support an optional
slot-in wireless receiver.
/Recording Review Capability
This capability automatically plays back the last 2 to 10
seconds of recorded video, allowing you to quickly
check the recorded contents.
/Built-in Time Code Generator/reader
A special-purpose Subcode track can be used to record
and reproduce time code information.
/Support for Metadata
Names/titles can also be recorded, e.g. the camera
person, the reporter, or the program which was
registered on the SD memory card in advance. This
information is also useful in managing information on
clips. Regarding SD memory cards, please also see
<Cautions in using SD memory cards> (page 17).
/Features USB2.0 port
By connecting with a PC via USB2.0, a P2 card inserted
in the AJ-SPC700P can be used as a bulk storage
device.
/DVCPRO/DV (IEEE1394 Digital input/output)
connection (when AJ-YAD800G attached)
By attaching the optional IEEE1394 interface board (AJ-
YAD800G), data can be input or output from a
connected external IEEE1394 device.
#,52%2'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧡ᐕ㧝㧞᦬㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ