Filter
Top Products
109
8
Chapter 8 Menu Description Tables (continued)
8-4-5 VF INDICATOR2
8-4-6 MODE CHECK IND
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
P2CARD
REMAIN
OFF
ONE-CARD
TOTAL
Select the indication mode for the P2
card’s remaining capacity.
OFF: Disable the remaining capacity
indication.
ONE-CARD:
Display the remaining capacity
of the P2 card currently used for
recording.
TOTAL
: Display the total remaining
capacity of all P2 cards in slots.
–CUFE
BATTERY ON
OFF
Set the battery voltage indication to ON
or OFF.
–CUFE
AUDIO LVL ON
OFF
Set the audio lever meter indication to
ON or OFF.
–CUFE
TC OFF
TCG
TCR
TCG/TCR
Select the time code to display.
OFF: Disable the time code display.
TCG: Display the time code generator
value in E-E mode.
TCR: Display the time code reader
value in V-V mode.
TCG/TCR:
Display the time code generator
value in E-E mode, and the time
code reader value in V-V mode.
–CUFE
SYSTEM INFO OFF
ALWAYS
NORMAL
Select the method of displaying system
information and warnings.
OFF:Display no warnings other than
“TURN POWER OFF” and
“SYSTEM ERROR”.
ALWAYS:
Always display warnings.
NORMAL:
Display warnings for 3 seconds only
when problems occur.
–CUFE
SAVE LED P2CARD
SAVE
Set the SAVE lamp function.
P2CARD:
The lamp blinks in synch with
the warning message when the
P2 card’s remaining recording
capacity is getting low.
SAVE: The lamp lights up when the
SAVE ON/OFF switch is set to
ON and the output system
assigned in [8-2-2 OPTION
MODE] is in the save mode.
–CUFE
DV ON
OFF
DV Select whether or not to enable DV
indication when the format is set to DV.
ON: Enable DV indication.
OFF:Disable DV indication.
–CUFE
VOICEMEMO ON
OFF
Select whether or not to enable the
indication during voice memo
recording.
ON: Enable indication.
OFF:Disable indication.
–CUFE
V
V
V
Items/
Data Saved
Adjustable
Range
Remarks
REC STATUS ON
OFF
Select whether or not to enable “REC”
indication in the viewfinder and on the
LCD monitor during recording.
ON: REC indication enabled.
OFF:REC indication not enabled.
<Note>
This option is useful when the AJ-
SPC700P is used independently. When
the 1394 control option is set to BOTH
with an external IEEE 1394 device,
settings are subject to setting of the
menu option REC TALLY in SYSTEM
MODE.
–CUF–
PROXY REC ON
OFF
When a video encoder card (AJ-
YAX800G, optional) is attached, proxy
recording information is displayed when
recording starts.
ON: Display indicating whether proxy
recording is to be performed on
the P2 card only, or on both the
P2 card and the SD memory card.
OFF:Proxy recording information is not
displayed.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
STATUS ON
OFF
Select whether or not to display the
status indication during MODE CHECK.
–CUFE
!LED ON
OFF
Select whether or not to display the
cause indication screen when the ! LED
turns on during MODE CHECK
–CUFE
FUNCTION ON
OFF
Select whether or not to display the
FUNCTION indication screen during
MODE CHECK.
–CUFE
AUDIO ON
OFF
Select whether or not to display the
AUDIO indication screen during MODE
CHECK.
–CUFE
P.ON IND ON
OFF
Select whether or not to display the
status indication screen after the power
is turned ON.
–CUFE
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ