Filter
Top Products
86
Chapter 6 Manuipulating Clips with Thumbnails (continued)
6-14 Formatting a P2 Card
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the MENU BAR button. The pointer moves to the
menu bar.
3 From the menu bar, select OPERATION FORMAT.
The following screen appears. Select the slot number
for the P2 card you want to format.
Select EXIT if formatting is not required.
4 The following screen appears. Use the cursor buttons
and the SET button to select YES.
5 The selected P2 card is formatted.
6-15 Formatting SD memory cards
SD memory cards can also be formatted from the thumbnail
screen. With an SD memory card inserted into the camera-
recorder, perform the following operation:
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the MENU BAR button. The pointer moves to the
menu bar.
3 From the menu bar, select OPERATION FORMAT.
The following screen appears. Select “SD-CARD”.
Select “EXIT” if formatting is not required.
4 The following screen appears. Use the cursor buttons
and the SET button to select YES.
5 The SD memory card is formatted.
<Note>
SD memory cards can also be formatted from the menu
screen. For more information, see [4-10-2 Formatting,
Writing and Reading an SD memory card].
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ