Filter
Top Products
54
Chapter 4 Adjustments and Settings for Recording (continued)
4-9 Menu-driven Function Setup
Each function is set up using the menu system.
4-9-1 Setting the Switchover of USER SW
GAIN
In addition to the standard L/M/H gain mode, the AJ-
SPC700P supports an S.GAIN (super gain) mode with more
than 30-dB gain-up.
To make use of this feature, you need to specify desired
gains through the menu option S.GAIN.
The menu options can be found in the <USER SW GAIN>
screen, which is accessible from the CAM OPERATION
page.
Settings Options and Usage
S.GAIN: Gain-ups with _ marks enabled.
Gain-ups without _ marks disabled.
4-9-2 Selecting Video Output Signals
You need to select the signals to be output from the VIDEO
OUT connector.
Select the video output signal on the menu option VIDEO
OUT SEL.
Use the menu option OUTPUT CHAR to select the character
contents to be superimposed onto the video output.
These options can be found in the OUTPUT SEL screen,
which is accessible from the SYSTEM SETTING page.
For more information, see [8-2-4 OUTPUT SEL].
4-9-3 Selecting Function for the FRONT
AUDIO LEVEL Control
The FRONT AUDIO LEVEL control can be assigned the
function of adjusting the recording level.
To specify whether or not the FRONT AUDIO LEVEL control
is effective on the channels set to accept input signals, use
the menu options FRONT VR CH1 and FRONT VR CH2.
These options can be found in the <MIC/AUDIO1> screen,
which is accessible from the MAIN OPERATION page.
For more information, see [8-6-4 MIC/AUDIO1].
86(56:*$,1!
6*$,1
_
E%
_
E%
2873876(/!
9,'(22876(/9%6
287387&+$50(1821/<
/&'021&+$521
9)02'(((3%
7+80%1$,/2872))
0,&$8',2!
)521795&+2))
)521795&+2))
0,&/2:&87&+2))
0,&/2:&87&+2))
/,0,7(5&+2))
/,0,7(5&+2))
05(&&+6(/&+
7(67721(1250$/
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ