Filter
Top Products
46
Chapter 4 Adjustments and Settings for Recording (continued)
Information Item Indication Status
Extender
EX2 Lens extender used.
MODE CHECK
Indication Area
(STATUS:
Master gain,
USER SW GAIN)
LOW/MID/HIGH
–3 to 30
S.GAIN 30/36
Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN is assigned
(Cause of !LED
illumination: displayed
full-screen)
z Indications selected
through the menu option
!LED are marked with [ ! ].
z Indications which may
activate the !LED are
marked with [ ].
GAIN (0 dB)
GAIN (–3 dB)
SHUTTER
WHITE PRE.
EXTENDER
BLACK STR.
MATRIX
COLOR COR.
FILTER
SUPER V
50M/25M/DV
ATW
Gain status
Gain status
Shutter status
White balance status
Extender status (EX2 or OFF)
Black stretch status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
SUPER V status (ON or OFF)
Recording mode (50M, 25M, or DV)
ATW status (ON or OFF)
(FUNCTION:
VIDEO OUT)
SW: MEM/CAM/OFF
SELECT: VBS/VF/Y
CHAR: ON/OFF
Position of VIDEO OUT OUTPUT SEL switch.
Setting for menu option VIDEO OUT SEL. This option can be found in the
<OUTPUT SEL> screen, which is accessible from the SYSTEM SETTING
page.
Position of VIDEO OUT CHARACTER switch
(FUNCTION:
P2CARD STATUS)
TOTAL
SLOT1/SLOT2/SLOT3/
SLOT4/SLOT5
OP-SLOT
Total remaining free space/capacities of the P2 cards loaded in P2 Card Slots
1 - 5
Remaining free space/capacity of each card. The numbers denote the P2
card slot numbers.
The card status is indicated as:
ACTIVE/ACTIVE!/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 CARD ACCESS LED and status of P2 cards]
(page 23).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
(AUDIO: Enabling or
disabling the FRONT
AUDIO LEVEL control)
CH1: ON/OFF
CH2: ON/OFF
If the FRONT AUDIO LEVEL control is in effect for Channel 1, then ON is
indicated. If not, OFF is indicated.
If the FRONT AUDIO LEVEL control is in effect for Channel 2, then ON is
indicated. If not, OFF is indicated.
(AUDIO: Power status
for the microphone)
FRONT: ON/OFF
REAR: ON/OFF
Power status of the front microphone
Power status of the rear microphone
For more information, see [8-6-5 MIC/AUDIO2].
(AUDIO: Input signal
and level for each
channel)
FRNT/W.L./REAR
CH1/2
Input signal and level for each channel
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ