Filter
Top Products
53
4
Chapter 4 Adjustments and Settings for Recording (continued)
4-8 Adjusting and setting the LCD
monitor
Using the LCD Monitor
1 Turn on the POWER switch of the AJ-SPC700P.
2 Slide the OPEN button in the arrow direction to
open the LCD monitor.
3 Adjust the angle of the LCD monitor for most
convenient viewing.
The monitor can turn up to 180 degrees towards the
lens and up to 90 degrees towards you.
<Note>
To prevent camera-recorder failure, do not allow undue
force to be applied to the monitor (when it is open).
4 The options BRIGHTNESS, COLOR LEVEL, and
CONTRAST show respectively the brightness, color
level and contrast of the screen. These options can be
found in the <LCD MONITOR> screen, which is
accessible from the SYSTEM SETTING page.
5 Through the menu option LCD MON CHAR, specify
whether or not the LCD should display the same
characters as the viewfinder.
This menu option can be found in the <OUTPUT SEL>
screen, which is accessible from the SYSTEM
SETTING page.
<Notes>
z When closing the LCD monitor make sure that it is
shut tight.
z In an environment with sudden temperature changes,
condensation may form on the liquid crystal surface
of the monitor. If this happens, wipe off the moisture
with a soft, dry cloth.
z When the camera-recorder is very cold, the video
image in the LCD monitor will appear slightly darker
immediately after the power is turned on. Once the
interior of the camera-recorder warms up, the LCD
monitor delivers normal brightness.
Self-portrait Shooting
When shooting with the LCD display angled 180 degrees
towards the lens, you can set the menu option SELF SHOOT
to “MIRROR”, to horizontally flip the video image on the LCD
display, and allow you to view a mirror image while shooting.
Note that only the video image on the LCD monitor is
horizontally flipped, not the actual video being recorded.
The menu option SELF SHOOT can be found in the <LCD
MONITOR> screen, which is accessible from the SYSTEM
SETTING page.
<Note>
When the LCD monitor is angled 180 degrees towards you
with the menu option SELF SHOOT to “MIRROR”, the LCD
monitor does not provide the same status indication as the
viewfinder, regardless of the setting for the menu option LCD
MON CHAR.
/&'021,725!
%5,*+71(66
&2/25/(9(/
&2175$67
%$&./,*+71250$/
6(/)6+2270,5525
$63(&7&219648((=(
2873876(/!
9,'(22876(/9%6
287387&+$50(1821/<
/&'021&+$521
9)02'(((3%
7+80%1$,/2872))
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ