Filter
Top Products
20
Chapter 2 Parts and their Functions (continued)
Positions of time code-related switches
and information provided
2-9 LCD Monitor
LCD monitor
The LCD monitor displays the video in the viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
In thumbnail display mode, clips can be edited or
deleted, or P2 cards can be formatted using the
MENU BAR button and CURSOR and SET buttons.
OPEN button
Used to open the LCD monitor.
THUMBNAIL button
This button switches the content on the LCD monitor
from the video in the viewfinder to clip thumbnails.
Another press switches them back to the video from the
viewfinder.
Note that this switchover is not performed during a
recording or playback.
MENU BAR button
In thumbnail display mode, this button allows you to
manipulate the menu bar (e.g., to delete clips).
CURSOR and SET buttons
The four triangular buttons are the CURSOR buttons,
and the center rectangular one is the SET button.
They are used to select a thumbnail and manipulate the
menu bar. For more information, see [Chapter 6
Manipulating Clips with Thumbnails].
Position of
DISPLAY switch
Position of TCG
switch
Information Item
CTL
SET Time code
F-RUN or R-RUN CTL
TC
F-RUN/SET/
R-RUN
Time code
UB
User bits or real-
time, time zone
LOOP
h
MEDIA
E
F
Y minM
s
frm
13 24
0
D
SLAVEHOLD W
BATT
EF
OVER OVER
10
OO
40
-dB
30
20
NDF
DV
DRIVE OP-SLOT
VTCG
TIME DATE
P- REC
CTL
Mode indication
W: Stays illuminated in 16:9 mode.
DV: Stays illuminated when the recording/playback format is
DV.
P-REC: Stays illuminated when the PRE REC MODE is set to
ON, and blinks when recording is continued after the
recording tally lamp has gone out.
Time code indication
NDF: Stays illuminated when the time code is in non-drop
frame mode.
DF: Stays illuminated when the time code is in drop frame
mode.
SLAVE:Stays illuminated when the time code is externally locked.
HOLD: Stays illuminated when the time code generator/reader
value is frozen.
CTL: Stays illuminated when the DISPLAY switch is positioned
at [CTL] to display the CTL count.
TCG: Stays illuminated when the DISPLAY switch is positioned
at [TC] (or [UB]) to display the TC (or UB) generator
value.
TC: Stays illuminated when the DISPLAY switch is positioned
at [TC] (or [UB]) to display the TC (or UB) reader value.
VTCG: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the VIUB generator value.
VTC: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the VIUB reader value.
TIME: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the real-time hour, minute and second.
DATE: Stays illuminated when the DISPLAY switch is positioned
at [UB] to display the real-time date.
No Indication:
The CTL, VTCG, TIME, and DATE stay off when the DISPLAY
switch is positioned at [UB] to display real time, time zone, hour
and minute.
Time count indication:
The time code, CTL, user bits and real time are shown.
<Note>
When the DISPLAY switch is positioned at UB, each press of the
HOLD button changes the indication through VTCG (VTC)
DATE TIME No Indication (Time Zone) TCG (TC), in that
order.
!1"
!2"
!3" !4"
!5"
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ