Filter
Top Products
117
8
Chapter 8 Menu Description Tables (continued)
8-6-5 MIC/AUDIO2 8-6-6 TC/UB
The ____ in the Adjustable Range column indicates the
preset mode.
Items/
Data Saved
Adjustable
Range
Remarks
FRONT MIC
POWER
ON
OFF
Select the phantom power supply for
the front microphone.
–CUF–
REAR MIC
POWER
ON
OFF
Select the phantom power supply for
the rear microphone.
–CUF–
AUDIO OUT ON
OFF
Set the audio output circuit.
OFF:Power-down output circuit to
disable output.
ON: Enable output.
–CUF–
MONITOR
SELECT
STEREO
MIX
Select the signal format for output to
the PHONE (earphones) jack.
–CUF–
FRONT MIC
LEVEL
–40dB
–50dB
Select the front microphone input level.
–CUF–
REAR MIC CH1
LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF–
REAR MIC CH2
LVL
–50dB
–60dB
Select the rear microphone input level.
–CUF–
REAR LINE IN
LVL
–3dB
0dB
+4dB
Select the rear line input level.
–CUF–
AUDIO OUT LVL –3dB
0dB
+4dB
Select the audio output level.
–CUF–
HEADROOM 18dB
20dB
Set the headroom (standard level).
–CUF–
WIRELESS
WARN
ON
OFF
Select whether or not to enable the
alarm to trigger for poor wireless
receiver reception.
–CUF–
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE DF
NDF
Set the time code mode.
DF: Drop frame.
NDF: Non drop frame.
–CUF–
UB MODE USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:Select UB value set in the LCD
section.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date,
time).
EXT: When “CAM” or “VIDEO” is
selected in the menu option
REC SIGNAL in the SYSTEM
MODE screen, user’s bit input to
the TC IN connector is the
reference.
When “1394” is selected, user’s
bit input to the DVCPRO/DV
connector is the reference.
If reading fails, USER value is
retained.
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with
the VAUX UB (VITC UB).
REGEN
:Read out value stored in the
card and record value
continuously.
–CUF–
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the
EXT value is recorded. If not,
USER value set by UB is
recorded.
TIME: Select local time (hours,
minutes, seconds).
DATE: Select local date and time (2 last
digits of year, month, date,
time).
TCG: TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with
the VAUX UB (VITC UB).
REGEN
:Read out value stored in card
and record value continuously.
–CUF–
TCG SET HOLD ON
OFF
ON/OFF switching for the feature that
always starts recording (when the
power is turned ON again) the TCG
value that was set before the power is
turned OFF.
–CUF–
#,52%2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧝㧞㧤ᣣޓᧁᦐᣣޓඦᓟ㧝㧞ᤨ㧠㧥ಽ