Filter
Top Products
Before using
10
LSQT1091
Quick Guide
ª
Charging the battery
1
Connect the AC cable to the AC adaptor and
the AC jack.
2
Put the battery on the battery mount by
aligning the mark and then securely plug it
in.
ª
Attaching the battery
Push the battery against the battery holder and
slide it until it clicks.
ª
Inserting/removing a cassette
1
Slide the [OPEN/EJECT] lever and open the
cassette cover.
2
After the cassette holder is opened, insert/
remove the cassette.
3
Push the [PUSH] mark
1
in order to close
the cassette holder.
4
Only after the cassette holder is completely
housed, close the cassette cover.
ª
Inserting/removing a card
1
Open the card slot cover.
2
Insert/remove the card into/from the card
slot.
≥When inserting a card, face the label side 1
towards you and push it straight in with one
stroke as far as it goes.
≥When removing the card, open the card slot
cover and press the center of the card and
then pull it straight out.
3
Securely close the card slot cover.
ª
How to turn on the power
1
While pressing the button
1
, set the
[OFF/
ON] switch to [ON].
OPEN/
EJECT
PUSH
1
1
OFF
ON
1
LSQT1091_ENG.book 10 ページ ２００６年１１月２７日 月曜日 午後１時１７分