Filter
Top Products
Record mode
36
LSQT1091
ª To select the color for fade in/fade out
The color which appears in fading pictures can be
selected.
1 Set [ADVANCED] >> [FADE COLOR] >>
[BLACK] or [WHITE].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
1 Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
Auto Ground-Directional Standby
(AGS)
This function prevents unnecessary recording
when you forget to pause recording and walk with
the Camcorder tilted upside down while recording
continues.
≥If the Camcorder continues to be tilted upside
down from the normal horizontal position while
recording on a tape, it is automatically put into
recording pause.
[AGS]: Auto Ground-Directional Standby
≥Set to Tape Recording Mode.
Set [SETUP] >> [AGS] >> [ON].
ª
To cancel Auto Ground-Directional
Standby
Set [SETUP] >> [AGS] >> [OFF].
≥The AGS function may activate and cause the
Camcorder to pause the recording if you are
recording a subject right above or right below
you. In these cases, set [AGS] >> [OFF] then
continue the recording.
≥Use the recording start/stop button to pause or
stop the recording. The AGS function is only a
backup function for when you forget to pause
the recording.
≥The time it takes the Camcorder to be put into
recording pause after being tilted upside down
varies depending on the operating conditions.
LSQT1091_ENG.book 36 ページ ２００６年１１月２７日 月曜日 午後１時１７分