Panasonic PV-GS320 Camcorder User Manual


 
Record mode
35
LSQT1091
Tele macro function
By focusing only on the subject and blurring the
background, the image can be impressive. This
Camcorder can focus on the subject at a distance
of approx. 50 cm (20 inches).
Set to Tape/Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon
1
appears.
2
Move the joystick right to select the
tele-macro icon [ ].
The [TELE MACRO ON] indication appears
on the screen of the Camcorder.
If the magnification is 10k or less, then it is
automatically set to 10k.
ª
To cancel the tele macro function
Select the [ ] icon again.
The [TELE MACRO OFF] indication appears on
the screen of the Camcorder.
If a sharper focus cannot be achieved, adjust
the focus manually.
In the following cases, the tele macro function is
canceled.
The zoom magnification becomes lower than
10k.
The power is off or the mode dial is operated.
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
Set to Tape Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon
1
appears.
2
Move the joystick left to select the fade icon
[].
The [FADE ON] indication appears on the
screen of the Camcorder.
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio
disappears completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [ ] icon again.
The [FADE OFF] indication appears on the
screen of the Camcorder.
1
B
1
LSQT1091_ENG.book 35 ページ 2006年11月27日 月曜日 午後1時17分