Panasonic PV-GS320 Camcorder User Manual


 
With a PC
60
LSQT1091
With DV cable
(optional)
OS:
Windows 2000/XP
1
Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.
2
Connect the Camcorder to the personal
computer with DV cable.
3
Select [start] >> [All Programs (Programs)]
>> [Panasonic] >> [Quick Movie Magic 1.0E]
or [MotionDV STUDIO 5.6E LE for DV] >>
[Quick Movie Magic] or
[MotionDV STUDIO LE for DV].
You can record the video edited by the PC onto
the tape in the Camcorder.
Using on Macintosh
ª
Operating environment on iMovie 4/
iMovie HD
OS:
Mac OS X v 10.3 to v 10.4
CPU:
PowerPC G3 (400 MHz or higher), G4, G5
Intel Core Duo, Intel Core Solo
Interface:
DV (FireWire) terminal (IEEE1394.a)
The supplied CD-ROM is available for Windows
only.
iMovie/iMovie HD, included with any new
Macintosh or sold with iLife.
1
Set the Camcorder to Tape Playback Mode.
2
Connect the Camcorder to your Macintosh
with the DV Interface Cable (optional).
For more information, please contact Apple
Computer, Inc. at http://www.apple.com.
ª
Copying still pictures on PC
1
Set the Camcorder to PC Connection Mode.
2
Connect the Camcorder to the personal
computer via the supplied USB cable.
3
Double-click [NO_NAME] or [Untitled]
displayed on the desktop.
Files are stored in [100CDPFP] folder in the
[DCIM] folder.
4
Using a drag-and-drop operation, move the
pictures you want to acquire or the folder
storing those pictures to any different
folder on the personal computer.
To disconnect USB cable safely
If USB cable is disconnected while the computer
is on, error dialog box may appear. In such a case
click [OK] and close the dialog box. By following
the steps below you can disconnect the cable
safely.
1
Double click the icon in task tray.
The hardware disconnection dialog box
appears.
2
Select [USB Mass Storage Device] and click
[Stop].
3
Verify [Matshita DVC USB Device] is
selected and click [OK].
You can safely disconnect the cable.
Note on the driver name displayed
The driver name displayed will differ depending
on your OS, operating environment and the mode
of the Camcorder.
Make sure Camcorder’s Card Access Lamp is
off and disconnect the cable. Also, the icon will
not be displayed when in Tape Recording Mode
or Tape Playback Mode.
If the above operation is not performed correctly,
when data is copied from the personal computer
to an SD Card, the copied data may be damaged.
When the following operations are performed, the
same results will occur as when the USB cable is
incorrectly removed (above). Therefore, it is
imperative that the above operation is completed
before proceeding.
When SD Card is removed.
CAUTION:
If you disconnect the USB cable while the
Card Access Lamp is on, it may damage the
Card data.
LSQT1091_ENG.book 60 ページ 2006年11月27日 月曜日 午後1時17分