Filter
Top Products
With a PC
62
LSQT1091
≥If you install the USB driver while the USB cable
is connected or if you do not follow these
Operating Instructions, the Camcorder will not
be recognized correctly. In this case, delete the
driver from [Device Manager] as described
below, uninstall the driver and re-install it.
Set the Camcorder to Tape Recording Mode,
Tape Playback Mode or PC Connection Mode,
connect it to the personal computer and delete
[DVC] or [Web-Camera] from [Device Manager].
Depending on your personal computer, one of
the following screens may appear.
1 Your personal computer does not support
USB 2.0 (Hi-Speed) so the video on tape
cannot be imported from the Camcorder to the
personal computer with the USB cable.
Connect to an USB interface port etc.
≥You can use the WEB camera function.
2 The personal computer has recognized a
USB 2.0 (Hi-Speed) driver other than the
Microsoft driver. Update the driver to make
sure that it operates properly.
-59-
3 The USB 2.0 (Hi-Speed) driver may not be
recognized correctly. Update the driver to
make sure that it operates properly.
-59-
ª About the SD Card
The SD Card is an external Memory Card that is
available in various capacities. It has a write
protect switch to prevent data writing and card
formatting, as well as a copyright protection
function.
≥SDHC Logo is a trademark.
≥miniSD Logo is a trademark.
≥All other company and product names in the
operating instructions are trademarks or
registered trademarks of their respective
corporations.
Files recorded on a SD Card
It may not be possible to play back the files on
this Camcorder recorded on and created by other
equipment or vice versa. For this reason, check
the compatibility of the equipment in advance.
ª
About the compatibility of the card
files
Data files recorded on an SD Card by this
Camcorder conform with DCF (Design rule for
Camera File system) established by JEITA
(Japan Electronics and Information Technology
Industries Association).
≥If you attempt to play back files recorded with
this Camcorder on other equipment or to play
back files recorded with other equipment on this
Camcorder, you may not be able to play them
back. Please check the compatibility with the
other equipment in advance.
ª
About the folder structure when using
the Memory Card in a personal
computer
≥When a Card with data recorded on it is inserted
into a personal computer, folders will be
displayed as shown in the following figure.
[100CDPFP]: The images (IMGA0001.JPG,
etc.) in this folder are recorded in
the JPEG format.
[MISC]: Files in which DPOF Data has
been set to the image are in this
folder.
≥[DCIM] etc. are necessary items in the folder
structure. They have nothing to do with actual
operation.
≥In Card Mode, the Camcorder automatically
saves file numbers (IMGA0001.JPG, etc.) along
with the images. The file numbers are recorded
with each image as consecutive numbers.
≥When using the software without indication
function, indication data, such as date, are not
displayed. Depending on the software in use,
the date and the time may not be displayed
correctly.
≥The memory capacity indicated on the SD Card
label corresponds to the total card capacity.
Some of this capacity is used to protect and
manage the copyright data and not all capacity
is available as conventional memory for a
Camcorder, personal computer or others.
Cancel
256
DCIM
100CDPFP
MISC
LSQT1091_ENG.book 62 ページ ２００６年１１月２７日 月曜日 午後１時１７分