Filter
Top Products
Attach the Battery to the AC Adaptor and
charge it.
. Before use, fully charge the Battery.
. Since the Battery will not be charged when
the DC Cable is connected to the AC Adaptor,
disconnect it from the AC Adaptor.
. The [CHARGE] Lamp lights up, and charging
starts.
. When the [CHARGE] Lamp goes off, charging
is completed.
Attach the charged Battery to the
Camcorder.
1 Slide the [OPEN/EJECT] Lever O toward
the front and pull up to fully open the
Cassette Compartment Cover.
o To protect the tape, ifthe cover is not fully
opened, the cassette holder cannot be ejected.
2 After the Cassette Holder is opened, insert
a Cassette.
:- _ O _ _E_'_-..J"
'
3 Close the Cassette Holder by pressing the
[PUSH] mark @.
4 Only after the Cassette Holder is
completely housed, close the Cassette
Compartment Cover by pressing the mark
O.
ooo
°o°
1 Place your Thumb on the [OPEN] @ Knob
and pull the LCD Monitor O out in the
direction of the arrow.
2 Open the Card Slot Cover O.
3 While holding the Memory Card with its
cut corner facing right _) insert it into the
Card Slot O.
4 Close the Card Slot Cover O securely.
• Open the LCD Monitor or extend the Viewfinder
before turning on the power.
Ill How to Turn on the Power
1 Set the [OFF/ON] Switch to [ON] while
pressing the button O.
• The [STATUS] indicator lights Red.
@
!11How to Turn off the Power
2 Set the [OFF/ON] Switch to [OFF] while
pressing the button O.
• The [STATUS] Indicator goes off.
OFF""ON o
Before using the Viewfinder, adjust the field of view
so that the displays inside the Viewfinder become
clear and easy to read.
1 Pullthe Viewfinder.
10