Filter
Top Products
Notes:
, Even if the [ _ SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
° When the color of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
, Photoshot Recording results in slightly inferior
image quality.
, For the number of still pictures to be recorded on a
card, refer to page 32.
, The sound cannot be recorded.
° While data is being recorded on a card, do not
operate the Mode Dial.
, When the Access Lamp is IlL do not insert or
remove a card.
° Another product may degrade or not play back data
recorded on this Camcorder.
, if set [ ,_hPICT. QUALITY] >> [ =_=], mosaic-pattern
noise may appear on a playback image depending
on the picture content.
The still pictures can be recorded on a Card at
regular intervals.
1 Set [ _ ADVANCED] >> [_ BURST MODE]
>> [ON].
• The [ _ ] Indication appears.
2 Press and hold the [PHOTO SHOT] Button.
, When [ON] is selected_ the still pictures can be
recorded in approximately 0.5 second intervals
until the [PHOTO SHOT] Button is released or 10
pictures are recorded.
III To Stop the RapidFire Consecutive
Photoshot in Progress
Release the [PHOTO SHOT] Button.
Notes:
• One more still picture may be recorded after you
release the [PHOTO SHOT] Button.
• if the Seff-timer Function is set_ the Camcorder
records up to 10 still pictures continuously.
• Intervals between recording pictures may become
longer depending on the card. We recommend
using a Panasonic SD Memory Card.
• When using the card formatted by other equipment
or a card that was recorded and erased repeatedly,
the intervals between recording pictures may
become longer, if so, back up your important data
on a PC, and format your card with this Camcorder.
You can record yourself while viewing the LCD
Monitor. You can record persons in front of the t_
camera while presenting them the image. The image
is horizontally flipped as if you see a mirror image.
(The image to be recorded is the same as that ._.
recording.)
• Extend the Viewfinder to see the picture while
recording. O
• Set to Tape/Card Recording Mode. ¢_
1 Rotate the LCD Monitor towards the lens
side.
• A vertically oriented display appears on the
Viewfinder screen_ this is normal and not indicative
of any trouble.
• When the LCD Monitor is rotated towards the
lens side_ the One-Touch Navigation icon will not
be displayed even ifyou press the center of the
Joystick Control.
To brighten the natural colors in a scene. Gain Up
mode works with the Built-in Video Light to enhance
the light's brightness.
• Set to Tape/Card Recording Mode.
Press the [LIGHT] Button. O
, The Built-in LED Video Light lights and the
Gain Up mode is set to on.
, Gain Up mode wilt be brighter than when only
the Video Light is on, however, washed out
images will appear.
33