Filter
Top Products
This function reduces the sound of wind hitting the
microphone when recording,
• Set to Tape Recording Mode.
1 Set [ _ BASIC) >> [_/_WIND CUT) >> [ON).
• The [ _,4_] Indication appears.
III To Cancel the Wind Noise Reduction
Function
Set [ _;BASIC] >> [_} WIND CUT] >> [OFF].
Notes:
= The default setting is [ON].
. Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When the
wind weakens, the stereo effect will be restored.)
This function is for recording a cinema-like image.
• Set to Tape Recording Mode.
1 Set [_ BASIC] >> [ _ CINEMA] >> [ON).
* Black bars appear at the top and bottom of the
screen.
III To Cancel the Cinema Function
Set [ _BASIC] >> [ _ CINEMA] >> [OFF].
Notes:
• images played back vary depending on the
TV connected. Please refer to the operating
instructions for your TV.
• This function does not widen the recording range.
• When images are played back on a TV screen, the
Date/Time Indication may be erased in some cases.
• Depending on the TV, the picture quality may
deteriorate.
• When a Cinema picture is imported onto a personal
computer, the imported picture may not be
displayed correctly, depending on the software in
used.
This allows you to record images compatible with
wide-screen TVs.
Wide Function: Images are recorded with a 16:9
aspect ratio.
4:3 Function: Images are recorded with a 4:3
aspect ratio.
Set to Tape/Card Recording Mode.
1 Set [ _BASIC) >> [ _ ASPECT) >> [4:3)
(4:3 Function) or [16:9) (Wide Function).
(4:3 Function) (Wide (16:9) Function)
Ill To Cancel the Wide/4:3 Function
Wide Function:
Set [ _ BASIC] >> [ _ ASPECT] >> [4:3].
4:3 Function:
Set [ _ BASIC] >> [ _ ASPECT] >> [16:9].
Notes:
• In the wide-screen mode, the menu screens,
operation icons and other screen displays appear
horizontally oriented.
• When images are played back on a TV screen, the
Date/Time Indication may be erased in some cases.
• Depending on the TV, the picture quality may
deteriorate.
• If the 4:3 Function is set, the menus screen
appears expanded vertically outside the screen.
• Concerning the TV to be connected and TV used
for playback
- When playing back images taken by this unit
on a TV screen, change the setting established
by tape playback mode [ _ SETUP] >> [[88 TV
ASPECT] to match the aspect ratio (4:3 or 16:9)
of the TV monitor to be connected. (p. 51)
• Depending on the settings of the TV connected, the
images may not be displayed properly. For more
information, please read the operating instructions
for the TV.
tD
O
P,
o
cL
tb
39