Panasonic PV-GS39 Camcorder Accessories User Manual


 
This function is useful when you want to record
close-up shots of subjects located beyond a
normal zoom range of 1× to 30× magnification.
With the Digital Zoom Function, you can select a
magnification from 50× up to 1000×.
* Bet to Tape Recording Mode.
1 Bet [ _ ADVANCED] >> [ [] D.ZOOM] >>
[_0x] or [1000×].
OFF Optical zoom only (Up to 30×)
50x IDigital zooming to 50×
i
_Dgta zoom ng to 1000×
2 Push the [W/T] Lever towards [W] or
towards [T] to zoom in or out.
-_,voL+
__ ,, _
III To Cancel the Digital Zoom Function
Set [_ ADVANCED] >> [[] D.ZOOM] >> [OFF].
Notes:
, The larger the digital zoom magnification, the more
the image quality is degraded.
. When the Card Recording mode is used, the Digital
Zoom Function cannot be used.
, White Balance cannot be set in the Digital Zoom
range.
. When pushing the [W/T] Lever as far as it will go,
you can zoom from f × to 30× in 3.3 seconds at the
maximum in the Recording Mode,
. The zoom speed varies according to the amount of
movement of the [W/T] Lever,
° The Variable Speed Zoom Function cannot be
used with the Remote Control, (PV-GS59 Only)
If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
If the Camcorder shakes too much, the images
may not be stabilized.
Set to Tape Recording Mode.
1 Bet [_ADVANCED] >> [_ EIS] >> [ON].
The [ _ ] Indication appears.
2 Press the Recording Start/Stop Button or
[PHOTO SHOT] Button to start recording.
Ill To Cancel the Image Stabilizer
Function
Set [_ ADVANCED] >> [ _ EIS] >> [OFF].
Notes:
When the MagicPix Function is used, the image
stabilizer function does not work. If so, the [ [_[] ]
indication flashes.
When the Gain Up mode is set to ON, the image
stabilizer function does not work. If so, the [ _ ]
indication flashes.
Under fluorescent lighting, image brightness may
change or colors may not look natural.
After-images may appear.
When a tripod is used, we recommend that you
turn the Image Stabilizer off.
In the following cases, the Image Stabilizer
Function may not work effectively.
- When the digital zoom is used
- When a conversion lens is used
- When recording is done in an extremely dark
place
- When the Camcorder is shaken greatly
- When you record a moving subject while tracking
it
36