Pentax X70 Digital Camera User Manual


 
118
3
Taking Pictures
5
Use the four-way controller (45) to select [O (On)/P (Off)].
The setting is saved.
6
Press the 3 button twice.
The camera is ready for taking pictures.
The AF assist light aids in focusing on dark subjects. This helps you to
focus on the subject in low light conditions where auto focus does not
work properly.
4
Use the four-way controller (23)
to select [Focus Assist].
5
Use the four-way controller (
45
) to select [
O
(On)/
P
(Off)].
The setting is saved.
6
Press the 3 button twice.
The camera is ready for taking pictures.
Setting the AF Assist Light (Focus Assist)
Looking at the light directly will not create safety hazard. However,
do not look into the emitter from a very short distance since you may
feel dazzled.
The camera does not emit the AF assist light under the following
conditions.
- In Movie mode
- When the focus mode is set to s (Infinity) or \ (Manual Focus).
MENU
Auto Macro
Focus Assist
Focusing Area
AF Setting
e_kb484.book Page 118 Wednesday, March 18, 2009 5:23 PM