Filter
Top Products
77
3
Taking Pictures
2
Turn the e-dial to change the
settings.
The settings you can configure change
depending on the saved mode.
3
When using the flash, press the b button.
The flash pops up. (p.112)
4
Take a picture.
• You can save settings in the USER mode when the capture mode is
set to e, b, c, or a by selecting [Save as USER] from the
[W Setting] menu. You cannot select [Save as USER] from other
capture modes.
• When the saved capture mode is b, the shutter speed is saved.
When the mode is set to c, the aperture is saved. When the mode is
a, the shutter speed and aperture are saved.
• In the default state, the default mode is e mode and the other settings
are saved as their respective defaults. Using [Reset] on the menu
returns the settings to their defaults.
• In USER mode, all settings saved as defaults for modes other than
capture mode can be changed. However, the changes to them are
only reflected in USER mode. Turning off the power will cancel all
changes to them and they will return to the last saved settings in USER
mode.
• Memory cannot be changed.
• In USER mode, the same restrictions apply as for the saved capture
mode.
• If you do not select [Save as USER], changes to USER mode settings
are not saved on the camera. Note that turning off the power or
changing the capture mode returns the camera to the saved settings.
e_kb484.book Page 77 Wednesday, March 18, 2009 5:23 PM