Filter
Top Products
76
3
Taking Pictures
You can take pictures with the settings saved in [Save as USER] on [W
Setting] menu (p.199).
Save the settings for the e, b, c, and a modes in advance for later
use.
In USER mode, you can change the settings saved during shooting.
1
Set the mode dial to A.
This recalls the saved settings.
•In a (Manual) mode, EV compensation is unavailable.
• A warning appears if there is a large difference between the current
exposure and the proper exposure. If the exposure is greater than
±2.0EV, only the exposure warning icon is displayed. If the exposure
is lower than ±2.0EV, the exposure warning icon is displayed and the
difference between the current exposure and the proper exposure is
shown in increments of 1/3EV.
• [AUTO] cannot be selected for sensitivity.
• ,, c, b, and d are unavailable.
• The shutter speed and aperture set for this mode are shared with b
and c modes. Changes to this value in one mode are reflected in the
others.
• Noise Reduction is used with shutter speeds slower than 1/4 seconds.
• Whenever the shutter speed or aperture is changed, the new value is
shown in a larger font size than normal (height of 1.5x).
• Even when the zoom ratio is changed, the aperture is maintained.
However, when the current aperture cannot be used with the selected
zoom ratio, the closest aperture is set. Even in this case, if you change
the zoom ratio again and the original aperture can be used, the setting
is returned to the original aperture.
Using the A (USER) Mode
e_kb484.book Page 76 Wednesday, March 18, 2009 5:23 PM