Filter
Top Products
246
9
Appendix
Data being recorded
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Data being processed
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no images or sound files.
This image/sound
cannot be processed
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
The built-in memory is
not enough to copy
images/sounds
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Compensation processing fails.
Display image/sound
from built-in memory
Displayed when the camera enters the built-in memory
display.
Please pop-up the flash. Press the b button to use the flash.
Please confirm the lens
cap is removed.
Appears when the power is turned on with the lens cap
attached.
Turn on the power again after removing the lens cap.
Message Description
e_kb484.book Page 246 Wednesday, March 18, 2009 5:23 PM