Filter
Top Products
PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual
Page 18
TEMPERATURE, HUMIDITY AND ALTITUDE
The following table lists the LF 6600 operating, storage and transit limits for temperature, humidity and
altitude.
Temperature, Humidity and Altitude Limits
1 Storage specifications are for 90 days maximum in Plasmon LMS packaging. No condensation is permitted. Transit specifications are
based on a maximum 1-week period in a factory-sealed container.
2 Maximum operating temperature is 42 _C for a free-standing drive at sea level unless otherwise stated. Maximum operating temperature
is derated linearly above 300 m altitude to 38 _C at 2,000 m altitude.
3 See the LD 6100/LF 6600/LF 6602 Product Specification (P/N 97653977) for more information concerning the temperature and humidity
operating range.
4 Media is limited to 2000 m. For conditions and limits pertaining to the media, refer to the LM 6000 Media Specification (P/N
97647044).
CONDITION OPERATING NONOPERATING
STORAGE/TRANSIT
1
Temperature
10 to 42° C
2
(50 to 108° F)
-40 to 66° C
-40 to 151° F)
-40 to 66° C
-40 to 151° F)
Maximum Rate of
Change
11° C/hr (20° F/hr) 20° C/hr (36° F/hr) 20° C/hr (36° F/hr)
Humidity
(Noncondensing
10 to 99% 5 to 95% 5 to 95%
Maximum Rate of
Change
10%/hr 10%/hr 10%/hr
Maximum Wet Bulb
Temperature
3
28° C (82° F) 46° C (115° F) 46° C (115° F)
Minimum Dew Point
2°
C (35.6° F) 2°
C (35.6°
0
F) 2°
C (35.6° F)
Altitude
4
Storage:
-300 to 3,000 m
(-984 to 9,840 ft)
Transit:
-300 to 2,000 m
(-984 to 6,562 ft)
with media
-300 to 3,000 m
(0984 to 9840 ft)
Storage:
-300 to 3,000 m
(984 to 9,840 ft)
Transit:
-300 to 12,000 m
(-984 to 40,000 ft)