Filter
Top Products
PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual
Page 42
WARNING
The weight of the LF 6600 on the extended platform may cause the
equipment cabinet to become unbalanced. Before proceeding,
ensure that your cabinet is securely anchored. Do not extend more
than one drive at a time.
EP004586
Do Not Extend Both Drives Simultaneously
5) Lower the LF 6600 chassis onto the extended slide platform assembly, seating the three
M4 screw heads on the bottom of the chassis into the three locating holes in the slide
platform.
WARNING
The LF 6600 must be moved and lifted by two persons. Physical injury
can result if one person attempts to move or lift the LF 6600.
Install and tighten three M4 screws horizontally, through the vertical tail of the slide platform to
retain the rear of the drive. Install and tighten two M4 screws up into the bottom of chassis to
retain the front of the LF 6600.
DO NOT EXTEND MORE
THAN ONE DRIVE AT A
TIME.
IF BOTH DRIVES ARE
EXTENDED AT THE SAME
TIME, THE CABINET MAY
BECOME UMBALANCED.