Filter
Top Products
Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge With a PC • Page 19
Connecting DV Input
If you have a DV camcorder or VCR, there may be times when you want to capture the DV
material directly into your computer, then edit in DV format and output the edited video
back to your DV device. Since no conversion is performed, it is not necessary to use the
Hollywood DV-Bridge for this process. You can accomplish this mode by simply connecting
your DV device directly to your PC. However, it might be more convenient to capture and
output through the Hollywood DV-Bridge. If your computer is not in a convenient location,
it may be easier to simply connect the DV device to the Hollywood DV-Bridge as follows:
1. Connect one end of a 1394/FireWire/i.LINK cable to the 1394 connector on the front
of the Hollywood DV-Bridge.
2. Connect the other end of the cable to the DV connector on the DV camcorder or VCR.
Hollywood DV-Bridge
Analog VCR, Camcorder, or TV
TV
VHS
Audio Out
Audio In
RCA Video Out
RCA Video In
S-Video Out
S-Video In
Front
Or
DV InDV Out
Hollywood DV-Bridge
Front
DV VCR or DV Camcorder
VHS