Filter
Top Products
Hollywood DV-Bridge User’s Guide • Using Hollywood DV-Bridge Without a Computer • Page 48
Converting DV to Analog Video
If you have a DV camcorder or VCR, you can use the Hollywood DV-Bridge to convert DV to
analog video without using a computer. To begin converting, make sure that the Hollywood
DV-Bridge is powered up. Then follow the procedures below.
Connecting DV Input
Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the front of the Holly-
wood DV-Bridge to the DV connector on the DV camcorder or VCR.
Note: This is the same setup used to connect a DV device for output as described in the
previous section, “Converting Analog Video to DV.” If you have already made the connec-
tion for that purpose, it is not necessary to change it. In this case, the 1394 cable handles
input and output.
DV InDV Out
Hollywood DV-Bridge
Front
DV VCR or DV Camcorder
VHS