Filter
Top Products
Hollywood DV-Bridge User’s Guide • Introduction • Page 8
Following is a description of each mode:
DV to Analog: Converts DV video to analog. When in this mode, the top LED is lit.
Pass Through: Allows video to be passed directly through the Hollywood DV-Bridge, for
example, when dubbing from one analog source to another without using a computer.
When in this mode the center LED is lit.
Analog to DV: Converts analog video to DV. When in this mode, the bottom LED is lit.
When connected to a computer, the Hollywood DV-Bridge automatically activates the cor-
rect mode. For example, if you connect an analog camcorder to the Hollywood DV-Bridge
RCA video input to capture video to the computer, the Hollywood DV-Bridge automatically
activates Analog to DV mode. If you connect an analog VCR to the Hollywood DV-Bridge
RCA video output and play back DV material from your editing software, the unit automat-
ically activates DV to Analog mode. Occasionally, the Hollywood DV-Bridge may activate the
wrong mode, for example, if input and output devices are connected and active at the
same time. In such a case, simply use the Mode Selector button on the back of the unit
to toggle through the available modes and select the right one.
Note: To convert video without a computer (as described in a separate section of this
user’s guide beginning on page 43
), use the Mode Selector button to choose the proper
conversion method.