Filter
Top Products
177
Changing Camera Settings
5
When [Info Disp] is set to [On], information is displayed on the
picture display in the following cases even when the picture display
is turned off in shooting mode (GP.56). (Only information, not the
shooting screen, is displayed.) This is useful when using the
external viewfinder.
• When the t (Self-timer) button or N (Macro) button is pressed.
• When the mode dial setting is switched.
• When the up-down dial is rotated.
• When the ADJ. lever is pressed to the left or right during manual
exposure mode (GP.79).
• When [AF/MF], [AF/Snap], [JPEG>RAW], [Color>B&W], or
[Color>TE] is set in [Function Button] (GP.164) and the Fn
(Function) button is pressed.
• When the F (Flash) OPEN switch is pressed to open the flash.
After the information is displayed and operations are performed for
several seconds, or when the shutter release button is half-pressed,
the information display disappears and the picture display turns off
again.
1
Display the setup menu.
• For the operating procedure, see P.156.
2
Press the " button to select [Info Disp] and press the $
button.
3
Press the !" buttons to select
[On].
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Displaying Information When the
Picture Display is Off (Info Disp)